ADF4002BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF), Phase Detector |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4002 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Max Supply Current | 6mA |
| Bandwidth | 400MHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/No |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4002BRUZ Overview
This clock IC is packaged using the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 16 terminations in this file. This clock generator ic should receive a voltage of 3V. It is designed that the Clock PLL's input should be CMOS, TTL. With the Surface Mount, it is easy to install this electric component on the panel. This frequency synthesizer requires a supply voltage above 2.7V to be safe. As far as the supply voltage is concerned, clock PLL can be used with 2.7V~3.3V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. Clock is designed for clock generator's output. As far as this electronic part is concerned, it can be classified as a Clock/Frequency Synthesizer (RF), Phase Detector component. Clock PLL is equipped with 16 pin count. The related electrical components for the base part number ADF4002 can be found below. The frequency synthesizer has 16 pins that are available. This time clock generator can handle a voltage of 3V as its supply voltage. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. 1 signal outputs maximi1e the output frequency. High efficiency is achieved when operating at a frequency of 400MHz. In order for it to fully perform time clock generator's functions, it needs a supply current of 5mA. During this clock generator operation, a maximum current of 6mA is supplied.
ADF4002BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4002BRUZ Applications
There are a lot of Analog Devices Inc. ADF4002BRUZ Clock Generators applications.
- 1 Gigabit Ethernet
- VSAT (Small Ground Satellite Station)
- FM demodulation networks for FM operations
- Clock synchronization
- FMCW Radar
- Closed circuit systems
- Automatic control system test
- Digital HDTV systems
- Aerospace and defense
- Signal generator