ADCMP601BKSZ-RL
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 6mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP601 |
| Pin Count | 6 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 6mW |
| Output Current | 50mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 4mA |
| Response Time | 5 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 4mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP601BKSZ-RL Overview
For convenience, it is packaged in 6-TSSOP, SC-88, SOT-363 .A comparator with a CMOS, TTL output is used here.As a result, it is designed with Tape & Reel (TR) package.There are6 terminals on the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is possible to classify the chip as with Latch .There are a total of 1 elements in it.The pinout of the component starts from 6 pins it has.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator is equipped with 6 pins.Search ADCMP601 to find more pin-to-pin solutions.The comparator presents a quiescent current of 4mA volts.Normal operation of the device requires a nominal supply current of 3.5mA .In order to run the device, there are only 3/5V power supplies required.Electronic comparator is possible to input a maximum of 5μA current into the device.Based on the voltage formula, the voltage gain of the part is 85dB .
ADCMP601BKSZ-RL Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 4mA
Voltage Gain: 85dB
ADCMP601BKSZ-RL Applications
There are a lot of Analog Devices Inc. ADCMP601BKSZ-RL linear comparators applications.
- Threshold Detectors
- General Purpose Low Voltage Applications
- Notebooks and PDAs
- Building automation
- Consumer Medical Electronics
- Set Top Boxes
- Window Comparators
- Limit Comparators
- DC/DC and AC/DC power supplies
- Portable Battery Monitoring