ADCMP553BRM
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 8 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparators |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | OPEN-EMITTER |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.135V |
| Nominal Supply Current | 42mA |
| Power Dissipation | 75mW |
| Response Time | 625 ps |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 5μA |
| Input Offset Voltage (Vos) | 10mV |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ADCMP553BRM Overview
The product is packaged in MSOP in order to facilitate transportation.Output type of this comparator is OPEN-EMITTER .You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparators family.Supplied by 3.3V voltage, the comparator can accomplish the many demanding tasks.There are a total of 1 elements in it.The pinout of the component starts from 8 pins it has.Electronic comparator has 8 pins.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 42mA when using the device.According to the voltage formula, the part has a voltage gain of 60dB .In general, temperatures higher than 85°C are not recommended.A temperature lower than -40°C is unsuitable for the device.There is a maximum voltage supply on the comparator of 5.25V .This comparator can be supplied with a voltage as low as 3.135V .There is a high gain COMPARATOR amplifier at the heart of the comparator.Comparator electronics is necessary to have an operating supply voltage of 3.3V for normal operation.
ADCMP553BRM Features
OPEN-EMITTER output capability
Employing 1 elements
Voltage Gain: 60dB
COMPARATOR amplifier
ADCMP553BRM Applications
There are a lot of Analog Devices, Inc. ADCMP553BRM linear comparators applications.
- Security Detection Systems
- High-Speed Differential Line Receiver
- Limit Comparators
- Window Comparators
- Infotainment & cluster
- Multivibrators and High-Voltage Digital Logic Gates
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Alarm and Monitoring Circuits
- Consumer Medical Electronics