ADCMP395ARMZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP395 |
| Pin Count | 10 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Propagation Delay | 9.7 μs |
| Quiescent Current | 51.9μA |
| Response Time | 9700 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.5V |
| Input Offset Voltage (Vos) | 2.5mV |
| Voltage Gain | 132dB |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 30nA |
| Current - Quiescent (Max) | 51.9μA |
| Voltage - Input Offset (Max) | 2.5mV |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP395ARMZ-RL7 Overview
To facilitate transportation, it comes packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .This comparator is of the Open Drain output type.The chip is packaged with Tape & Reel (TR) .There are10 terminals on the comparator.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.The device includes 10 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.There are 10 pins on the comparator.In order to find a solution that meets your specific needs, search ADCMP395 for more pin-to-pin solutions.There is a quiescent current of 51.9μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.According to the voltage formula, the part has a voltage gain of 132dB .
ADCMP395ARMZ-RL7 Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 51.9μA
Voltage Gain: 132dB
ADCMP395ARMZ-RL7 Applications
There are a lot of Analog Devices Inc. ADCMP395ARMZ-RL7 linear comparators applications.
- Lithium ion battery monitoring
- Portable and Battery-Powered Systems
- General Purpose Low Voltage Applications
- Battery-Powered Electronics
- Hand-Held Electronics
- Infotainment and Clusters
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Ultra-Low Power Systems
- High-Speed Differential Line Receiver