ADA4627-1BRZ
| Parameters | |
|---|---|
| Bandwidth | 19MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 19000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 70μV |
| Settling Time | 450 ns |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.000005μA |
| Input Capacitance | 7pF |
| Neg Supply Voltage-Max (Vsup) | -36V |
| Input Voltage Noise Density | 16.5nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4627 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 7mA |
| Quiescent Current | 7mA |
| Slew Rate | 84V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 116 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 200μV |
ADA4627-1BRZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. A J-FET-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 7mA, this op amp ic can operate. It is a member of the 120dB's 120dB family. 1 channels are available on the instrumentation amplifier. There is an 7mA quiescent current running through op amp ic.
ADA4627-1BRZ Features
8 Pins
supply voltage of 15V
120dB voltage gain
ADA4627-1BRZ Applications
There are a lot of Analog Devices Inc. ADA4627-1BRZ Instrumentational OP Amps applications.
- MP3
- Industrial applications including automation
- Video amplifiers
- Medical instruments
- Power transmission
- Division circuits
- Signal filtering
- Video data acquisition
- High speed sample
- Home audio systems