ADA4004-1ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | iPolar® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4004 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 2.2mA |
| Quiescent Current | 2.2mA |
| Supply Current-Max | 2.4mA |
| Slew Rate | 2.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 113 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 125μV |
| Gain Bandwidth Product | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 112.04dB |
| Power Supply Rejection Ratio (PSRR) | 118dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 40μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 1.8nV/sqrt Hz |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4004-1ARZ-R7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 8 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 125μV. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 2.2mA, this op amp ic can operate. 112.04dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. The linear amplifier is packaged by using a TAPE AND REEL axis. Instrumentation amplifiers are numbered by their iPolar? series. The current is quiescent at 2.2mA.
ADA4004-1ARZ-R7 Features
8 Pins
supply voltage of 5V
112.04dB voltage gain
ADA4004-1ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4004-1ARZ-R7 Instrumentational OP Amps applications.
- Power generator
- Professional videography
- Multiplication circuits
- Biopotential
- earphone
- Voltage regulation circuit
- Test equipment
- High gain DC amplifier
- Communication
- Polarized electrodes