AD8692ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8692 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Operating Supply Current | 2.1mA |
| Quiescent Current | 1.05mA |
| Min Input Voltage | 2.7V |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 0.2pA |
| Max Input Voltage | 6V |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8692ARZ-REEL7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 2.1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 126.02dB. There are a total of 2 channels available on the op amps. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. The current is quiescent at 1.05mA.
AD8692ARZ-REEL7 Features
8 Pins
supply voltage of 5V
126.02dB voltage gain
Output Type: Rail-to-Rail
AD8692ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8692ARZ-REEL7 Instrumentational OP Amps applications.
- Video amplifiers
- ECG equipment
- Non-polarized electrodes
- Division circuits
- Precision measurement
- Semiconductor detectors
- Multimedia playback equipment
- Exponential operation circuits
- Weak signal detection
- MP3