AD8608ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8608 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 4.8mA |
| Max Supply Current | 4.8mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 80μV |
| Gain | 120 dB |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Input Capacitance | 8.8pF |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8608ARZ Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. There are a total of 14 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 14 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 4.8mA and 10 . You should keep the voltage gain at 120dB for the time being. Instrumentation amplifier has 4 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. DigiTrim? corresponds to linear amplifier's series. There is a quiescent current of 1.2mA in this operational amplifier circuit.
AD8608ARZ Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8608ARZ Applications
There are a lot of Analog Devices Inc. AD8608ARZ Instrumentational OP Amps applications.
- Automotive sensors
- Instrumentation
- Test equipment
- High-frequency data acquisition systems
- Medical imaging
- Information processing
- Test and measurement instruments
- Weak signal detection
- Portable media players
- RF cable systems