AD8601WARTZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | AD8601 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.2mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 8.4MHz |
| Unity Gain BW-Nom | 8200 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1.3mV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Wideband | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8601WARTZ-RL Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. Buffer amps of this type are called General Purpose-types. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. The pins on this board total to 5 in total. This linear amplifier should be powered by an 3V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 5 pins are located on the operational amplifiers. The input offset voltage is 500μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 1.2mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 100dB at all times. Instrumentation amplifier has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The instrumentation amplifier is packed in the form of TAPE AND REEL. Automotive corresponds to linear amplifier's series. There is a quiescent current of 1.2mA in this operational amplifier circuit.
AD8601WARTZ-RL Features
5 Pins
supply voltage of 3V
100dB voltage gain
Output Type: Rail-to-Rail
AD8601WARTZ-RL Applications
There are a lot of Analog Devices Inc. AD8601WARTZ-RL Instrumentational OP Amps applications.
- MP3
- Polarized electrodes
- Video data acquisition
- RF cable systems
- Oscilloscopes
- Image computer boards
- ECG equipment
- Signal filtering
- Computer workstations
- Strain gauges