AD829JRZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Applications | Voltage Feedback |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD829 |
| Pin Count | 8 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Power Dissipation | 900mW |
| Output Current | 32mA |
| Quiescent Current | 5.3mA |
| Slew Rate | 230V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 120 dB |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 600MHz |
| Gain Bandwidth Product | 300MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 750000 kHz |
| Voltage Gain | 96.26dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Settling Time | 65 ns |
| -3db Bandwidth | 120MHz |
| Dual Supply Voltage | 9V |
| Input Capacitance | 1.5pF |
| Input Bias Current | 3.3μA |
| Input Voltage Noise Density | 1.7nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD829JRZ Overview
A Tube package contains class d amplifier.For the sake of reducing space, class d amp is accessible in the 8-SOIC (0.154, 3.90mm Width) package.This is a good choice for Voltage Feedback because of audio amplifiers high performance.A Surface Mount mounting method is used to connect audio power amplifier to the PCB.The part has a base part number of AD829 for audio amp.The pin count is 8.Digital amplifier has 8 terminations.Its -3db bandwidth is 120MHz.It is included in Operational Amplifier.Audio amplifier is powered by 6.5mA supply current.Amplifier ic uses 8 pins for construction.A temperature of less than 125°C should be used for operation.Temperatures of at least -55°C are recommended for operation.Channels available at the moment total 1.With a 15V supply voltage, high efficiency can be achieved.This audio amplifier has a type of amplifier of OPERATIONAL AMPLIFIER.A value of 32mA is set for the output current in this case.There is a supply type of Dual associated with it.This audio amplifier ic gains a voltage of 96.26dB when it is powered up.An external influence cannot affect it since it consumes 5.3mA quiescent current.
AD829JRZ Features
Operational Amplifier subcategory
8 pins
1 channels
AD829JRZ Applications
There are a lot of Analog Devices Inc. AD829JRZ Video Amps and Modules applications.
- HiFi Audio System Equipment
- Microphone Preamplifier Circuit
- Car Audio
- General-Purpose Amplifier Applications
- Analog and Digital Mixing Consoles
- High-Fidelity (HiFi) Headphone Drivers
- Analog and Digital Mixing Consoles
- Aftermarket telematics
- External Audio Amplifiers
- High-End A/V Receivers