AD8130ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8130 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 2.25V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 10.8mA |
| Logic Function | Receiver |
| Slew Rate | 1100V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~25.2V ±2.25V~12.6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 290MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 71dB |
| Voltage - Input Offset | 400μV |
| Settling Time | 20 ns |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8130ARZ-REEL7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Differential-type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 400μV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. An 10.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 71dB. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. Linear amplifier resistance should stay within the range of 6MOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
AD8130ARZ-REEL7 Features
8 Pins
supply voltage of 5V
71dB voltage gain
Resistance of 6MOhm
AD8130ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8130ARZ-REEL7 Instrumentational OP Amps applications.
- Band-stop filter
- Ultrasound transducers
- Subtraction operation circuits
- High speed sample
- Industrial control system
- Power generator
- Differentiator circuits
- Professional videography
- Instrumentation
- MP3