AD8099ACPZ-REEL7
| Parameters | |
|---|---|
| Input Capacitance | 1.8pF |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8099 |
| Pin Count | 8 |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Operating Supply Current | 16mA |
| Nominal Supply Current | 16mA |
| Output Current | 35mA |
| Quiescent Current | 16mA |
| Slew Rate | 1350V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 178mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 510MHz |
| Gain Bandwidth Product | 3 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3800000 kHz |
| Voltage Gain | 81dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 100μV |
| Settling Time | 18 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
AD8099ACPZ-REEL7 Overview
The linear amplifier is packaged in a 8-VFDFN Exposed Pad, CSP case which makes it easy for the consumer to handle. This is a Voltage Feedback type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 500μV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 16mA and 10 . The voltage gain should stay at 81dB. There are a total of 1 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 10V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 16mA quiescent current running through op amp ic.
AD8099ACPZ-REEL7 Features
8 Pins
supply voltage of 5V
81dB voltage gain
AD8099ACPZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8099ACPZ-REEL7 Instrumentational OP Amps applications.
- Micro signal measurement
- Medical instruments
- MP3
- Proportional operation circuits
- Computer workstations
- Fast A/D and D/A converters
- Measurements of Wheatstone bridge
- Test and measurement instruments
- Video computer boards
- Active probe