AD8055AR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8055 |
| Pin Count | 8 |
| Operating Supply Voltage | 10V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Operating Supply Current | 5.4mA |
| Nominal Supply Current | 6.5mA |
| Output Current | 60mA |
| Quiescent Current | 6.5mA |
| Slew Rate | 1400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 300000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 71dB |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Settling Time | 20 ns |
| -3db Bandwidth | 300MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8055AR Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Voltage Feedback-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 5.4mA . It is recommended to keep the voltage gain at 71dB at all times. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 10V voltage. There is an 6.5mA quiescent current running through op amp ic. Electronic ic chip's consumer IC type can be sorted with VIDEO AMPLIFIER.
AD8055AR Features
8 Pins
71dB voltage gain
AD8055AR Applications
There are a lot of Analog Devices Inc. AD8055AR Instrumentational OP Amps applications.
- Gaming industry
- Exponential operation circuits
- Proportional counter tubes
- Micro signal measurement
- Multimedia playback equipment
- Comparator
- Band-stop filter
- Industrial control system
- Portable electronic products powered by batteries
- Weighing systems