AD8052AR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8052 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 11mA |
| Output Current | 45mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 1.7mV |
| Gain Bandwidth Product | 80MHz |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 50 ns |
| -3db Bandwidth | 110MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.4pF |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8052AR Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a Voltage Feedback type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 1.7mV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing a supply current of 4.8mA , this buffer op amp will be able to operate. 98dB should remain the voltage gain. Buffer op amp is equipped with 2 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The quiescent current is 5.5mA.
AD8052AR Features
8 Pins
98dB voltage gain
Output Type: Rail-to-Rail
AD8052AR Applications
There are a lot of Analog Devices Inc. AD8052AR Instrumentational OP Amps applications.
- Precision measurement
- High-frequency data acquisition systems
- pH (acidity)
- Measurements of Wheatstone bridge
- Subtraction operation circuits
- Commercial audio systems
- Digital cameras
- Micro signal measurement
- High/low-pass filter circuit
- Switching amplifier