AD7949SCPZ-EP-RL7
| Parameters | |
|---|---|
| Reference Type | External, Internal |
| Data Interface | SPI, DSP |
| Resolution | 1.75 B |
| Sampling Rate | 250 ksps |
| Voltage - Supply, Analog | 2.3V~5.5V |
| Voltage - Supply, Digital | 2.3V~5.5V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 250k |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Power Consumption | 13.5mW |
| Integral Nonlinearity (INL) | 1 LSB |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 85.5 dB |
| Differential Nonlinearity | 1 LSB |
| Conversion Time-Max | 3.2μs |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | PulSAR® |
| JESD-609 Code | e4 |
| Feature | Temperature Sensor |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 4.25mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7949 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Bipolar, Unipolar |
| Configuration | MUX-S/H-ADC |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Power Dissipation | 13.5mW |
| Number of Bits | 14 |
| Input Type | Differential, Pseudo-Differential, Single Ended |
| Min Input Voltage | 500mV |
| Architecture | SAR |
| Number of Inputs | 8 |
| Max Input Voltage | 5V |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital |
AD7949SCPZ-EP-RL7 Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the 20-WFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -55°C~125°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Differential, Pseudo-Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.3V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7949 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.It is possible to categorize the supply type according to Analog, Digital.The supply/digital voltage of this electrical AD converter is 2.3V~5.5V.This electronic digital converter is mounted in the way of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.8 inputs are employed.It operates with the minimal supply voltage of 2.3V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 13.5mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 4.25mW.Temperature Sensor can be ensured when operating.The ADC converter consists of 1 elements.The maximal input type of this electronic AD converter is 5V.The digital converter supports the minimal input voltage of 500mV.It is a type of FPGA belonging to the PulSAR? series.
AD7949SCPZ-EP-RL7 Features
1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 2.3V
1 elements
PulSAR? series
AD7949SCPZ-EP-RL7 Applications
There are a lot of Analog Devices Inc. AD7949SCPZ-EP-RL7 ADC applications.
- RADAR processing, digital oscilloscopes
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Communications
- High Speed Data Acquisition for PCs
- Displaying
- Multicarrier, multimode digital receivers
- Instrumentation and test equipment
- Handheld Terminal Interface
- High Speed Data Acquisition
- Microcontrollers.