AD790JNZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD790 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 8mA |
| Power Dissipation | 250mW |
| Propagation Delay | 50 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 45 ns |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 95 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~7V ±2.25V~16.5V |
| Output Current per Channel | 6.4mA |
| Input Offset Voltage (Vos) | 600μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Dual Supply Voltage | 9V |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 10mA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 5μA @ 5V |
| Hysteresis | 500μV |
| CMRR, PSRR (Typ) | 95dB CMRR, 90dB PSRR |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD790JNZ Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .There is a CMOS, TTL output type for this comparator.As a result, it is designed with Tube package.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.When supplied with 15V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical with Latch comparator.Electronic comparator includes 8 pins.The type of mounting recommended is Through Hole .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching AD790 .The comparator displays a quiescent current of 10mA .Electronic comparator is recommended that the nominal supply current of the device be 8mA .In order to operate normally, a supply voltage of 0 is required.
AD790JNZ Features
CMOS, TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 10mA
AD790JNZ Applications
There are a lot of Analog Devices Inc. AD790JNZ linear comparators applications.
- Appliances
- Mobile Phones
- Threshold Detectors
- Lithium ion battery monitoring
- General Purpose Low Voltage Applications
- Current and voltage sensing
- Battery-Powered Electronics
- Automatic Test Equipment
- Infotainment and Clusters
- DC/DC and AC/DC power supplies