AD790AQ
| Parameters | |
|---|---|
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 95 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~7V ±2.25V~16.5V |
| Input Offset Voltage (Vos) | 600μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Dual Supply Voltage | 15V |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 10mA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 5μA @ 5V |
| Hysteresis | 500μV |
| CMRR, PSRR (Typ) | 95dB CMRR, 90dB PSRR |
| Height | 3.56mm |
| Length | 10.29mm |
| Width | 7.67mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD790 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Power Dissipation | 250mW |
| Propagation Delay | 50 ns |
| Quiescent Current | 10mA |
AD790AQ Overview
Electronic comparator is packaged in 8-CDIP (0.300, 7.62mm) for convenient transportation.A comparator with an output type of CMOS, TTL is being used.Ready for shipping in Tube package.There are 8 terminals on the comparator.The electrical component here belongs to the Comparator family.With a 15V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical with Latch comparator.Electronic comparator has 8 pins.Electronic comparator is recommended that you mount the device using type Through Hole .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions by searching AD790 .The comparator displays a quiescent current of 10mA .Comparator electronics is necessary to have a voltage of 5V for normal operation.
AD790AQ Features
CMOS, TTL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 10mA
AD790AQ Applications
There are a lot of Analog Devices Inc. AD790AQ linear comparators applications.
- High-Speed Sampling Circuits
- Metering Systems
- Simple Analog-to-Digital Converters (ADCs)
- General-Purpose, Low-Voltage Applications
- Battery-Powered Electronics
- RC Timers
- Factory automation & control
- Portable Battery Monitoring
- Motor drives
- Notebooks and PDAs