AD7740KRMZ
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Voltage to Frequency |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CAN ALSO OPERATE FROM 4.75V TO 5.25V SUPPLY |
| Subcategory | Analog Special Function Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7740 |
| Pin Count | 8 |
| Output Voltage | 2.7V |
| Operating Supply Voltage | 5V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1.5mA |
| Accuracy | 1 % |
| Max Input Voltage | 2.5V |
| Supply Type | Single |
| Reference Voltage | 2.5V |
| Linearity | ±0.012% |
| Positive Input Voltage-Max | 3.1V |
| Full Scale | ±50ppm/°C |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Packaging | Tube |
| JESD-609 Code | e3 |
AD7740KRMZ Overview
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it can be found here. Electronic part Surface Mount is mounted in this way. There is a package in the way of Tube. Currently, an electrical device of type Voltage to Frequency is being used. Termination in 8 refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. There is a 8 pin count on this device. Providing power to the device is a supply voltage of 3.3V. Parts that are related to the base part number can be identified. When a computer or other device is connected to the Internet, there are 8 pins, which are pronged contacts. For its reliability, it operates at a minimum operating temperature of 0°C. The device operates at a maximum operating temperature of 85°C in order to ensure its reliability. In Surface Mount, it is mounted. This part is included in Analog Special Function Converters. When the supply voltage (Vsup) exceeds 3V, it should be used. 5.25V is the maximum supply voltage (Vsup). It operates with the frequency of 1MHz. 1.5mA requires a supply current to perform its functions properly. The maximal input type of this electronic part is 2.5V. This electrical device is powered by 5V voltage. Electronic parts of this type have a supply type of Single. In this electrical device, the reference voltage is 2.5V. It supports the output voltage of 2.7V. It is also characterized by CAN ALSO OPERATE FROM 4.75V TO 5.25V SUPPLY.
AD7740KRMZ Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 terminations
8 pin count
8 pins
AD7740KRMZ Applications
There are a lot of Analog Devices Inc. AD7740KRMZ V/F & F/V Converters applications.
- 13-bit Analog-to-Digital Converters (ADC)
- Speedometers
- Low-Cost Analog-to-Digital Conversion
- Hand-Held Tachometers
- Phase Locked Loops
- Over-and Under-Speed Sensing
- Microprocessor Data Acqusition
- Remote-Sensor Monitoring
- lsolation of High Common-Mode Voltages
- Serial frequency output