AD633JRZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD633 |
| Function | Analog Multiplier |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 8V |
| Operating Supply Current | 6mA |
| Power Dissipation | 500mW |
| Number of Bits | 4 |
| Accuracy | 2 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 3 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD633JRZ Overview
Its packaging is made up of Tube.This module is embedded within the 8-SOIC (0.154, 3.90mm Width) package in order to provide cost-effectiveness.Frequently, 4-Quadrant bits per stage are used.For its operation, a voltage of 15V is applied.In this case, the supply voltage is nominally negative and referred to as -15V.An RF signal modulated at 1MHz occupies the frequency range of 1MHz.A number of electronic parts with a similar part number can be found under AD633.This is a type of 8-pin electronic component with a high reputation for quality and performance.In the subcategory of Analog Computational Functions, it can be found as an electronic device.Using the Surface Mount method, it is mounted on the PCB.A maximum temperature of 70°C should be maintained for the electronic device.Temperatures below 0°C should be maintained to ensure proper operation of electronic devices.Reflow temperature limit 260 is determined by the component with the lowest temperature tolerance.A voltage of 6mA is an ideal operating supply voltage for it.A voltage higher than 8V should be used for the dual supply.Dual supply voltages should be lower than 18V.The frequency range of 1MHz corresponds to a modulated radio-frequency signal.The device is capable of supporting the maximum voltage input of 10V, which allows designers to take full advantage of its flexibility.A dual supply voltage of 15V is used for its operation.The number of bits of information that can be stored is 4.The unit can operate at 15V volts of supply voltage.It incorporates elements of 1.In this case, the maximum supply voltage is limited to 18V.For normal operation, a minimum supply voltage of 8V is maintained.The frequency should not exceed 1MHz to avoid failures.In order to achieve high efficiency, there are a number of 3 amplifiers working in concert.
AD633JRZ Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 15V
3 amplifiers
AD633JRZ Applications
There are a lot of Analog Devices Inc. AD633JRZ Analog Multipliers & Dividers applications.
- Band-pass filter
- Biopotential
- Mobile phone
- Measurements of Wheatstone bridge
- Automation control systems
- Signal transformation
- Displayers for aircraft and air transportation control systems
- Switching amplifier
- Automotive sensors
- Logarithmic and exponential operation circuits