AD633JNZ
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | AD633 |
| Function | Analog Multiplier |
| Operating Supply Voltage | 15V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 8V |
| Operating Supply Current | 6mA |
| Max Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 2 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 3 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AD633JNZ Overview
Packages for this product are made from Tube.Due to the cost-effectiveness of the package, it is included in 8-DIP (0.300, 7.62mm).The use of 4-Quadrant bits per stage is common.It operates with the supply voltage of 15V.The nominal negative supply voltage of -15V is provided.An modulated radio-frequency signal occupies the frequency range of 1MHz.The base part number AD633 indicates that there will be a number of electronic parts that share many similarities.This is a type of 8-pin electronic component with a high reputation for quality and performance.In the subcategory Analog Computational Functions, it belongs to the category of electronic devices.It is mounted on the PCB using the method of Through Hole.Electronic devices should be kept at 70°C degrees Celsius at all times.It is recommended that the electronic device operate at a minimum temperature of 0°C.It is ideally suited to the operating supply voltage of 6mA.There should be a higher dual supply voltage than 8V.The dual supply voltage should generally be lower than 18V.The frequency range of 1MHz corresponds to a modulated radio-frequency signal.Hence, designers are able to make full use of its flexibility because it supports the maximum input voltage of 10V.It is powered by a dual supply voltage of 15V.The number of bits of information that can be stored is 4.A voltage of 15V can be used to supply power to the device.At 18V, the maximum supply voltage is limited.Normal operation requires a minimum supply voltage of 8V.For failure prevention, the frequency should not exceed 1MHz.The 3 amplifiers provide high efficiency by working together.1 channels are configured on it.The supply current should be kept below 6mA in order to achieve high reliability.
AD633JNZ Features
Supplied in the 8-DIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 15V
3 amplifiers
AD633JNZ Applications
There are a lot of Analog Devices Inc. AD633JNZ Analog Multipliers & Dividers applications.
- Power generator
- Measurements of Wheatstone bridge
- Large motor controllers
- Logarithmic and exponential operation circuits
- Comparator
- Portable electronic products powered by batteries
- Tablets
- Professional videography
- Signal amplification
- Thermocouples