AD632AD
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Analog Computational Functions |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD632 |
| Function | Analog Multiplier/Divider |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 22V |
| Number of Elements | 1 |
| Temperature Grade | OTHER |
| Number of Channels | 6 |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 0.5 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 12V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Bits/Stages | 4-Quadrant |
| Height | 5.08mm |
| Length | 19.94mm |
| Width | 7.87mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD632AD Overview
Its packaging is made up of Tube.It is embedded in the 14-CDIP (0.300, 7.62mm) package for cost-effectiveness.There is a considerable amount of use of 4-Quadrant bits per stage.The device operates at a voltage of 15V.A nominal negative supply voltage of -15V is provided.During the period of 1MHz, a modulated radio-frequency signal occupying the frequency range is present.To prevent signals from reflecting off the end of the transmission line, there are 14 terminations.This part number AD632 has a number of similarities to other electronic parts.Known for its high quality and superior performance, it is a type of 14-pin electronic component.Under the subcategory of Analog Computational Functions, it is an electronic device.Using the Through Hole method, it is mounted on the PCB.125°C is the maximum temperature at which the electronic device should operate.It is recommended that electronic devices operate at a minimum temperature of -55°C.Reflow temperature limit NOT SPECIFIED is determined by the component with the lowest temperature tolerance.It is ideal for use with 6mA as the operating supply voltage.Dual supply voltages should be higher than 8V.In general, dual supply voltages should be lower than 18V.A digital IC of type ANALOG MULTIPLIER OR DIVIDER performs the same function as an analog IC.Modulated radio-frequency signals occupy the frequency range of 1MHz.As it supports a maximum input voltage of 12V, it ensures that designers can take full advantage of its flexibility.The unit is powered by a dual supply voltage of 15V.Information of 4 bits can be stored.A voltage of 22V is required to operate it.A 1 element is incorporated in it.Channels 6 have been configured.
AD632AD Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 22V
AD632AD Applications
There are a lot of Analog Devices Inc. AD632AD Analog Multipliers & Dividers applications.
- Radiation thermometry transducers
- Power control
- Car stereo
- Proportional counter tubes
- Automation control systems
- Displayers for aircraft and air transportation control systems
- Navigation
- Multimedia playback equipment
- Signal amplification
- Signal operation