AD603ARZ
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 31.3dB |
| Dual Supply Voltage | 5V |
| Noise Figure | 8.8 dB |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | X-AMP® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 103Ohm |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD603 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6.3V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 12.5mA |
| Power Dissipation | 400mW |
| Slew Rate | 275V/μs |
| Amplifier Type | Variable Gain |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 9.5V~12.6V ±4.75V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 560μV |
| Bandwidth | 90MHz |
| Gain Bandwidth Product | 90MHz |
AD603ARZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Variable Gain-type. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. 8 pins are available on the instrumentation amplifier. Op amp rates 560μV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. Using an 20mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 31.3dB's 31.3dB family. Buffer op amp is equipped with 1 channels on the device. A voltage rating of 2 is indicated for the op amp's operating supply voltage. As the name implies, X-AMP? refers to the series of the buffer op amp. Instrumentation amplifier resistance should stay within the range of 103Ohm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
AD603ARZ Features
8 Pins
supply voltage of 5V
31.3dB voltage gain
Resistance of 103Ohm
AD603ARZ Applications
There are a lot of Analog Devices Inc. AD603ARZ Instrumentational OP Amps applications.
- Non-polarized electrodes
- High/low-pass filter circuit
- Hand-held batteries
- Fission chambers
- Switching amplifier
- Band-pass filter
- Signal operation
- Weighing systems
- Mobile phone
- Gaming industry