AD532SD
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Analog Computational Functions |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | AD532 |
| Function | Analog Multiplier/Divider |
| Output Voltage | 13V |
| Operating Supply Voltage | 22V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 1 % |
| Slew Rate | 45 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 1 μs |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 1MHz |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 15V |
| Number of Bits/Stages | 4-Quadrant |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD532SD Overview
Packages for this product are made from Tube.Consequently, it is embedded in the 14-CDIP (0.300, 7.62mm) package to ensure cost-effectiveness.There is a common practice of using 4-Quadrant bits per stage.A voltage of 15V is used as the supply voltage for this device.For -15V, a nominal negative supply voltage is provided.During the period of 1MHz, a modulated radio-frequency signal occupying the frequency range is present.Various terminations, such as 14 terminations, prevent signals from reflecting off the end of the transmission line.Electronic parts with a number of similarities can be found under its base part number AD532.A 14-pin electronic component is well known for its superior quality and performance in the industry.In the subcategory of Analog Computational Functions, it can be found as an electronic device.For mounting the component on the PCB, Through Hole is used.Electronic devices should be operated at a maximum temperature of 125°C.Temperatures below -55°C should be maintained to ensure proper operation of electronic devices.A voltage of 6mA is an ideal operating supply voltage for it.A dual supply should have a voltage that is higher than 10V.Dual supply voltages should be lower than 22V.The ANALOG MULTIPLIER OR DIVIDER IC functions as an analog IC.The frequency range of 1MHz corresponds to a modulated radio-frequency signal.Consequently, designers can take full advantage of its flexibility in terms of input voltage 10V.15V is the dual supply voltage for this device.The number of bits of information that can be stored is 4.Depending on the supply voltage 22V, it is capable of operating.There is a voltage released from the output end, which is 13V.Specifically, it uses 1 circuits to accomplish its functions.
AD532SD Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 22V
AD532SD Applications
There are a lot of Analog Devices Inc. AD532SD Analog Multipliers & Dividers applications.
- Portable docking station
- Vehicle electronics
- Video conversion and routing
- High gain DC amplifier
- Multiplication and division circuits
- Fast A/D and D/A converters, video amplifiers
- Hand-held batteries
- Weak signal detection
- Test and measurement instruments
- single/dual op amp sum and difference circuits