AD532JHZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Supply Voltage | 15V |
| Base Part Number | AD532 |
| Function | Analog Multiplier/Divider |
| Output Voltage | 10V |
| Operating Supply Voltage | 15V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 10V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Max Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 1 % |
| Slew Rate | 45 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 3 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 4.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD532JHZ Overview
The packaging of the product is made up of Tube.In order to maximize cost effectiveness, it is incorporated into the TO-100-10 Metal Can package.Most frequently, 4-Quadrant bits are used per stage.A voltage of 15V is used for its operation.-15V is supplied with a nominal negative supply voltage.The frequency range of 1MHz is occupied by a modulated radio-frequency signal.Electronic parts with a number of similarities can be found under its base part number AD532.A 10-pin electronic component is well known for its superior quality and performance in the industry.This is an electronic device that belongs to the Analog Computational Functions subcategory.It is mounted on the PCB using the method of Through Hole.In order to ensure the integrity of the electronic device, the maximum temperature should be kept at 70°C.The minimum teperature that the electronic device operate with should be kept at 0°C.The operating voltage of 6mA is ideal for this device.There should be a higher dual supply voltage than 10V.In general, dual supply voltages should be lower than 18V.The type of IC ANALOG MULTIPLIER OR DIVIDER is analog.A modulated radio-frequency signal falls within the frequency range of 1MHz.The device is capable of supporting the maximum voltage input of 10V, which allows designers to take full advantage of its flexibility.15V is the dual supply voltage for this device.There is the possibility of storing information in 4 bits.In order for it to operate, it must be supplied with a voltage of 15V.A maximum supply voltage is limited at 18V.Normal operation requires a voltage of 10V as the minimum supply voltage.In order to prevent failures, the frequency should not exceed 1MHz.There are 3 amplifiers working together to provide high efficiency.10V is the voltage that is released from the output end.It is designed with 1 circuits to achieve its specific functions.Maintaining the supply current below 6mA can lead to high reliability.
AD532JHZ Features
Supplied in the TO-100-10 Metal Can package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 15V
3 amplifiers
AD532JHZ Applications
There are a lot of Analog Devices Inc. AD532JHZ Analog Multipliers & Dividers applications.
- Oscilloscopes
- Industrial applications including automation
- Integrator and differentiator circuits
- Band-stop filter
- Power control
- Hand-held batteries
- Portable media players
- Cinema or auditorium audio system
- Signal operation
- Strain gauges