A80C188XL25
| Parameters | |
|---|---|
| Length | 29.464mm |
| Width | 29.464mm |
| RoHS Status | RoHS Compliant |
| Mount | Through Hole |
| Number of Pins | 68 |
| Packaging | Bulk |
| Published | 1996 |
| Part Status | Discontinued |
| Number of Terminations | 68 |
| ECCN Code | 3A001.A.3 |
| Additional Feature | DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 25MHz |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Voltage | 5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Access Time | 25 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 5 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 5.21mm |
A80C188XL25 Overview
High reliability is achieved by using advanced packaging methods Bulk. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR. Total terminations are 68. Turn on the cpu microprocessor and let it run with a 5V voltage supply. It has a 16-Bit architecture. 25MHz is the CPU's frequency. You can find information about the functions of 68 pins in the datasheets. An example of a Microprocessors embedded microprocessor. 8 is the width of the external data bus on this CPU. Injecting pins into the embedded microprocessor body results in 68 pins. As a result of its Through Hole mounting, this CPU is widely used in a wide variety of applications. According to the datasheet, the embedded microprocessor requires 5V power supply. There is 5V voltage at the CPU core. It is not possible to supply a voltage to the CPU higher than 100mA. You should not igDRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERSre additional features of the embedded microprocessor, such as DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS. For hardware interrupts, there are 5 external interrupt terminations. The DMA (Direct Memory Access) process is programmed using 2 channels.
A80C188XL25 Features
16-Bit Structure
A80C188XL25 Applications
There are a lot of Intel A80C188XL25 Microprocessor applications.
- Fire alarms
- Safety field
- Automatic control
- Laminators
- Leakage current tester
- Pacemakers (used to control abnormal heart rhythm)
- 3D printers
- Smart instruments
- Computed Tomography (CT scan)
- Process control devices