A6D-3100
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Contact Material | Copper |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Insulation Material | POLYBUTYLENE TEREPHTHALATE |
| Weight | 350mg |
| Actuator Material | Polyphenylene |
| Operating Temperature | -20°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Series | A6D |
| JESD-609 Code | e4 |
| Feature | IP64 - Dust Tight, Water Resistant |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pins |
| ECCN Code | EAR99 |
| Number of Positions | 3 |
| Voltage - Rated | 30VDC |
| Additional Feature | SEALED CONSTRUCTION |
| Voltage - Rated DC | 30V |
| Pitch | 0.100 2.54mm Full |
| Orientation | Straight |
| Terminal Pitch | 2.54mm |
| Current Rating | 30mA |
| Contact Finish | Gold |
| Termination Style | PC Pin |
| Body Breadth | 6.6 mm |
| Actuator Type | Slide (Standard) |
| Circuit | SPST |
| Contact Resistance | 100mOhm |
| Insulation Resistance | 100000000Ohm |
| Max Current Rating | 300mA |
| Dielectric Withstanding Voltage | 500VAC V |
| Electrical Life | 2,000 Cycles |
| Max Voltage Rating (DC) | 30V |
| Mechanical Life | 5000 cycles |
| Contact Timing | MAKE-BEFORE-BREAK |
| Number of Switch Sections | 3 |
| PCB Hole Count | 6 |
| Contact Function | ON-OFF |
| Washable | Yes |
| Actuator Level | Flush, Recessed |
| Length | 0.379 9.63mm |
| Actuator Length | 0m |
| Height Above Board | 0.173 4.40mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
See Relate Datesheet