A6282EESTR-T

A6282EESTR-T

0.5mm PMIC A6282 24 Pin 5V 24-WFQFN Exposed Pad


  • Manufacturer: Allegro MicroSystems
  • Origchip NO: 26-A6282EESTR-T
  • Package: 24-WFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 507
  • Description: 0.5mm PMIC A6282 24 Pin 5V 24-WFQFN Exposed Pad (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-WFQFN Exposed Pad
Number of Pins 24
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2008
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 24
ECCN Code EAR99
Type Linear
Terminal Finish Matte Tin (Sn)
Applications Backlight
HTS Code 8542.39.00.01
Subcategory Display Drivers
Technology CMOS
Terminal Position QUAD
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Base Part Number A6282
Pin Count 24
Number of Outputs 16
Operating Supply Voltage 5V
Max Supply Voltage 5.5V
Min Supply Voltage 3V
Nominal Supply Current 45mA
Output Current 54.5mA
Max Supply Current 45mA
Voltage - Output 12V
Topology Shift Register
Current - Output / Channel 50mA
Internal Switch(s) Yes
Number of Segments 16
Switching Frequency 30MHz
Voltage - Supply (Min) 3V
Multiplexed Display Capability NO
Data Input Mode SERIAL
Height 750μm
Length 4mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

A6282EESTR-T Overview


To save board space, it uses the 24-WFQFN Exposed Pad package. This LED driver has 16 outputs.The mounting method is Surface Mount.The system emerges as a Linear with high efficiency.-40°C~85°C TA is the operating temperature of the led driver.Taking advantage of Backlight has considerable benefits.For its operation, terminations with a value of 0 are used.With a base of 24, this LED light driver is configured.If the voltage supply is lower than 3V, undetermined failures may occur.The segment count is 16.The device has been mounted on the Surface Mount.Under the base part number A6282, you'll find this LED driver.As a maximum value, 5.5V is acceptable.A 12V volt output voltage is provided by this device.In this device, there are 24 pins.In addition, it can also be categorized into Display Drivers based on its characteristics.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.Whenever the supply current is lower than 45mA, it can provide high efficiency.54.5mA is the maximum amount of current that can be supplied to the load.There is 5V internal voltage required to power systems.Having the switching frequency at 30MHz enables this electronic component to perform at its best.

A6282EESTR-T Features


Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 30MHz

A6282EESTR-T Applications


There are a lot of Allegro MicroSystems A6282EESTR-T LED Driver ICs applications.

  • General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
  • White LED Backlight for portable equipment
  • Museum lighting
  • Constant Voltage Power Source for portable equipment
  • Medical surgery lighting
  • Gallery lighting
  • LED headlights
  • Panel lighting
  • Down lights
  • Linear fluorescent

Write a review

Note: HTML is not translated!
    Bad           Good