A2982SLWTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A2982 |
| Pin Count | 20 |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Number of Elements | 8 |
| Polarity | NPN, PNP |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Collector Emitter Voltage (VCEO) | 50V |
| Max Collector Current | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Collector Emitter Saturation Voltage | 1.8V |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
A2982SLWTR-T Overview
It is packaged in the form of a Tape & Reel (TR).Package 20-SOIC (0.295, 7.50mm Width) contains it.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.The temperature should be set to -20°C~85°C TA to ensure reliable functioning.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of Bipolar volts can be achieved by this LED driver.The A2982 family consists of this type.It has a total of 20 terminations.The operation is performed through the 20 pins.The LED driver has 8 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 5V.As a result, it is mounted in the manner of Surface Mount.20 pins are connected to it in total.The output current is set to 500mA in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.A total of 8 elements are present.
A2982SLWTR-T Features
Supplied from 5V
A2982SLWTR-T Applications
There are a lot of Allegro MicroSystems A2982SLWTR-T Power Switches ICs applications.
- Portable GPS Device
- Portable Video Game Players
- USB Ports/Hubs
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Storage Drives
- Telecom and Network Systems
- Handheld Devices
- Wireless Modem Data Cards
- Wearable Devices