93LC46C-I/MS
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 93LC46C |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Serial |
| Memory Size | 1Kb 128 x 8 64 x 16 |
| Nominal Supply Current | 2mA |
| Memory Type | Non-Volatile |
| Clock Frequency | 3MHz |
| Access Time | 200 ns |
| Memory Format | EEPROM |
| Memory Interface | SPI |
| Organization | 64X16 |
| Write Cycle Time - Word, Page | 6ms |
| Density | 1 kb |
| Standby Current-Max | 0.000001A |
| Serial Bus Type | MICROWIRE |
| Endurance | 1000000 Write/Erase Cycles |
| Write Cycle Time-Max (tWC) | 6ms |
| Data Retention Time-Min | 200 |
| Write Protection | SOFTWARE |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
93LC46C-I/MS Overview
Non-Volatile is its memory type. In addition, memory ics is available in a Tube case as well. Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, memory ics is a single file. The memory size of the chip is 1Kb 128 x 8 64 x 16 Mb. This device utilizes a EEPROM format memory which is of mainstream design. -40°C~85°C TA is an extended operating temperature range, making this device ideal for demanding applications. A voltage of 2.5V~5.5V is possible to be applied to the supply. Its recommended mounting type is Surface Mount. As you can see from the diagram, the chip is planted with 8 terminations. In total, 1 functions are supported by this part. A voltage of 3V is required for the operation of this memory device. A clock frequency rotation within 3MHz is used for the ic memory chip to rotate data. In order to select similar parts, typical manufacturers refer to 93LC46C as the device's base part number. It is encased in an 8-pin package that contains this ic memory chip. The memory device has 8 pins, which means that it has 8 memory locations, which indicates it is an 8-bit device. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 2mA for its nominal supply current when it comes to the memory component. Power supplies for this memory chip are merely 3/5V . Data is carried and transferred to the CPU by the MICROWIRE-type serial bus this memory integrates with.
93LC46C-I/MS Features
Package / Case: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
8 Pins
93LC46C-I/MS Applications
There are a lot of Microchip Technology 93LC46C-I/MS Memory applications.
- eDRAM
- data buffer
- mainframes
- Camcorders
- eSRAM
- multimedia computers
- personal computers
- networks
- graphics card
- telecommunications