8001701FA
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | CLOCK INHIBIT |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Prop. Delay@Nom-Sup | 25 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 32mA |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.03mm |
| Length | 10.3mm |
| Width | 6.73mm |
| Thickness | 1.65mm |
8001701FA Overview
Taking the total number of terminations on the chip and adding them up, we get 16. It is packed in a case number Rail/Tube. The part's operating supply voltage is rated 5V. A total of 1 elements are present on this part. It has 16 pins. Using Surface Mount as a mount point is recommended. In this case, the electronic component belongs to the LS. The operating supply voltage of this chip is noted to be within the range 5V. Please take note of the following additional aspects of this section: CLOCK INHIBIT. It can deliver voltage at 5V. It has 8 bits in total. The pin count is 16. This product should not be used at temperatures above 125°C. This device should not be operated below -55°C. We use this supply voltage under 5.5V. This supply voltage is employed higher than 4.5V.
8001701FA Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
8001701FA Applications
There are a lot of Texas Instruments 8001701FA Shift Registers applications.
- store data in digital form
- LED matrix control
- Counter
- Serial-to-parallel data conversion
- Flash Memory
- ROM Chips
- Interconnectors
- data manipulation
- 7-segment display control
- Data manipulation