7WBD3306DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 833mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 7WBD3306 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WBD3306DTR2G Overview
Due to the fact that it is provided in the 8-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.The basic configuration includes 8 terminations.There is a base part number 7WBD3306 that can be used to locate signal switch's related components as well.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch contains 8 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.This multiplexer ic has 8 pins configured.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer provides 1 bits.Keep Vsup at 4V to avoid unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 1mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.In terms of resistance, it has a value of 70Ohm.This mux switch configuration has 2 elements.
7WBD3306DTR2G Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3306DTR2G Applications
There are a lot of ON Semiconductor 7WBD3306DTR2G Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- Implementing boolean functions with multiple variables
- Data distribution
- Logic gates for other digital devices
- War field flying robot with a night vision flying camera
- Time division multiplexing system
- Enabling block of memory depending on address in memory chips
- Used to connect a single source to multiple destinations
- Seven segment displays
- Control unit of Central Processing unit (CPU)