7705302EA
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-GDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 22V |
| Voltage - Supply, Single/Dual (±) | 12V~20V ±5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 4.5V |
| Screening Level | MIL-STD-883 |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 50ns, 50ns |
| Charge Injection | 10pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 800ns |
| Switch-off Time-Max | 650ns |
| Normal Position | NC |
| RoHS Status | Non-RoHS Compliant |
7705302EA Overview
Presented in 16-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 4. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 22V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. If you are using a dual power supply, you should attach at least 4.5V.
7705302EA Features
1 Channels
Switch Circuit: SPST - NC
7705302EA Applications
There are a lot of Maxim Integrated 7705302EA Analog Switches & Multiplexers ICs applications.
- Industrial
- Battery Powered Instruments
- Isolation
- Precision data acquisition
- Industrial control systems
- PDH Multiplexers
- Audio and video routing
- Microprocessor Controlled Analog Systems
- Central office
- Multiplexers