74VHCT374AN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NOT SPECIFIED |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 130MHz |
| Family | AHCT/VHCT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74VHCT374AN Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). It is included in the package Tube. The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop is a part of the 74VHCTseries of FPGAs. Its output frequency should not exceed 130MHz Hz. The list contains 1 elements. This process consumes 4μA quiescents. There have been 20 terminations. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 4pF farads. Electronic devices of this type belong to the AHCT/VHCTfamily. 5.5Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 4.5V. The flip flop has 2ports embedded within it.
74VHCT374AN Features
Tube package
74VHCT series
74VHCT374AN Applications
There are a lot of Rochester Electronics, LLC 74VHCT374AN Flip Flops applications.
- Count Modes
- Power down protection
- Control circuits
- ESD protection
- Buffered Clock
- Load Control
- Counters
- Frequency division
- High Performance Logic for test systems
- Parallel data storage