74LVTH162373DLG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 3.1 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 2.2 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 4.6 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Number of Input Lines | 16 |
| Length | 15.875mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVTH162373DLG4 Overview
In the SSOP package, it can be found as an embedded module. Rail/Tube is the packaging method. There are 8 bits in this electronic part. The device consists of 48 terminations that are designed to be used in conjunction with it. With a supply voltage of 3.3V, it operates. 48 pins are included. It is a member of the LVT family of electronic devices. There are 48 pins on it. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. It consists of 16 input lines from which an electronic circuit can be built. High efficiency requires a supply voltage of 3.3V. The quiescent current consumed by it is 5mA because it is unaffected by external factors. A total of 2 elements make up this object. 12mA represents the low level output current. -12mA represents the high level output current. Ideally, the operating temperature should be lower than 85°C. There should be a temperature above -40°C at which the device operates. Voltages up to 3.6V can be supplied. A minimal voltage of 2.7V is needed to operate it. There is a logic IC that it uses that is a BUS DRIVER. The output current of 12mA makes it feature maximum design flexibility.
74LVTH162373DLG4 Features
SSOP package
8 Bits
48 pin count
48 pins
2 elements
74LVTH162373DLG4 Applications
There are a lot of Texas Instruments 74LVTH162373DLG4 Latches applications.
- Synchronous frequency dividers
- Registers
- Automotive Infotainment
- Lamp and Display (LED)
- Frequency dividing
- A/D and D/A conversion
- Multi-line decoders
- A/D converters
- General-Purpose Register
- Automotive Cluster