74LVT273D,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVT273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Clock Frequency | 150MHz |
| Family | LVT |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 5.9 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74LVT273D,118 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). The Tape & Reel (TR)package contains it. Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 2.7V~3.6V. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74LVTseries of FPGAs. You should not exceed 150MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 190μA quiescent current and is not affected by external forces. Currently, there are 20 terminations. The 74LVT273 family contains this object. Power is supplied from a voltage of 3.3V volts. A 4pFfarad input capacitance is provided by this T flip flop. It is a member of the LVTfamily of D flip flop. It is part of the FF/Latchesbase part number family. There is a 3.6Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2.7V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. An electrical current of 3.3V volts is applied to it.
74LVT273D,118 Features
Tape & Reel (TR) package
74LVT series
3.3V power supplies
74LVT273D,118 Applications
There are a lot of NXP USA Inc. 74LVT273D,118 Flip Flops applications.
- ESCC
- Buffered Clock
- ESD performance
- Computers
- Bus hold
- Control circuits
- Registers
- Common Clocks
- Functionally equivalent to the MC10/100EL29
- Balanced 24 mA output drivers