74LVCH16374ADGG,11
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 300MHz |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74LVCH16374ADGG,11 Overview
The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). The package Tape & Reel (TR)contains it. The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 1.65V~3.6Vvolts. -40°C~125°C TAis the operating temperature. This D latch has the type D-Type. It is a type of FPGA belonging to the 74LVCH series. It should not exceed 300MHzin its output frequency. A total of 2 elements are present. There is a consumption of 20μAof quiescent energy. The number of terminations is 48. You can search similar parts based on 74LVCH16374. A voltage of 1.8V is used to power it. Input capacitance of this device is 5pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 48 pins. In this device, the clock edge trigger type is Positive Edge. There are 16bits in its design. There is a 3.6Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 1.65V. A total of 2ports are embedded in the D flip flop. 100nAquiescent current consumed.
74LVCH16374ADGG,11 Features
Tape & Reel (TR) package
74LVCH series
48 pins
16 Bits
74LVCH16374ADGG,11 Applications
There are a lot of Nexperia USA Inc. 74LVCH16374ADGG,11 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Shift registers
- Communications
- Memory
- Individual Asynchronous Resets
- Shift Registers
- Modulo – n – counter
- Differential Individual
- Power down protection
- Frequency Divider circuits