74LVCH162374APAG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 4.5pF |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVCH162374APAG Overview
It is embeded in TSSOP case. A total of 2elements are contained within it. 48terminations have occurred. A voltage of 3.3V provides power to the D latch. This D flip flop belongs to the family of LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. This board has 48 pins. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. The design is based on 16bits. In order to achieve its superior flexibility, 1 circuits are used. A D flip flop with 2embedded ports is available. High efficiency requires the supply voltage to be maintained at 3.3V. There is 10μA quiescent current consumption by it. A -12mAis set for the high level output current. There is no low level output current set at 12mA. Ideally, the operating temperature should be below 85°C. If the operating temperature is higher than -40°C, the system should operate properly. Normally, it operates with a voltage of 2.7VV as its minimum supply voltage. It supports a maximum supply voltage of 3.6V volts. This logic IC is BUS DRIVER. A total of 2 functions are available on the T flip flop. A total of 48 pins are present on this device.
74LVCH162374APAG Features
48 pins
16 Bits
2 Functions
48 pin count
74LVCH162374APAG Applications
There are a lot of Integrated Device Technology (IDT) 74LVCH162374APAG Flip Flops applications.
- Memory
- Test & Measurement
- Common Clocks
- High Performance Logic for test systems
- Single Down Count-Control Line
- Power down protection
- Counters
- Modulo – n – counter
- Latch
- Latch-up performance