74LVC4066PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 15Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC4066 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 5.3 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 4.2 ns |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 46 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.9ns, 5ns |
| Charge Injection | 7.5pC |
| Crosstalk | -56dB @ 1MHz |
| Switch-on Time-Max | 8ns |
| Switch-off Time-Max | 9.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC4066PW,112 Overview
The electrical component comes in 14-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 14. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 2.7V voltage supply, the electrical part should be switched on and run. 14 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with 74LVC4066 if you're looking for variants. The internal resistance of this digital multiplexer is 15Ohm. The datasheets for the 14 pins explain the functions. normally, users should not supply switches with voltages higher than 5.5V. Analog switch ics with Single supply type are cost-effective. The lowest voltage the electronic part should receive is 1.65V. For this digital switch to work, 40μA current would suffice. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. The electronic component can function from 5V. Among the inputs that can be operated are the 4 inputs.
74LVC4066PW,112 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 500MHz
74LVC4066PW,112 Applications
There are a lot of Nexperia USA Inc. 74LVC4066PW,112 Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Optical Applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Avionics
- PDH Multiplexers
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PBX interfaces
- Industrial
- Cable PC
- Routers