74LVC2G74GS,115
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 13.4 ns |
| Turn On Delay Time | 2.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 4.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| fmax-Min | 200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.35mm |
| RoHS Status | ROHS3 Compliant |
74LVC2G74GS,115 Overview
As a result, it is packaged as 8-XFDFN. D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis used as the supply voltage. A temperature of -40°C~125°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 200MHzin its output frequency. In total, it contains 1 elements. It consumes 40μA of quiescent There have been 8 terminations. The 74LVC2G74 family contains it. A voltage of 1.8V is used as the power supply for this D latch. Input capacitance of this device is 4pF farads. This D flip flop belongs to the family of LVC/LCX/Z. Surface Mount mounts this electronic component. Basically, it is designed with a set of 8 pins. The clock edge trigger type for this device is Positive Edge. There are 1bits in this flip flop. Vsup reaches its maximum value at 5.5V.
74LVC2G74GS,115 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
74LVC2G74GS,115 Applications
There are a lot of Nexperia USA Inc. 74LVC2G74GS,115 Flip Flops applications.
- Memory
- Registers
- Individual Asynchronous Resets
- Safety Clamp
- High Performance Logic for test systems
- Storage Registers
- Power down protection
- Clock pulse
- Data Synchronizers
- Frequency Divider circuits