74LVC1T45GW-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100, 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 16μA |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
74LVC1T45GW-Q100H Overview
Embedded in the 6-TSSOP, SC-88, SOT-363 package, it is now available to you.A Tape & Reel (TR) package is used to package it.This output uses Tri-State, Non-Inverted.This electrical device has a translator type of Voltage Level.A Surface Mount mounting method has been used for this electronic part.Bidirectional is the Channel type of this electrical device.Operation is performed at -40°C~125°C TA.0 terminations are used to end transmission lines.A base part number 74LVC1T45 indicates the related parts.Level translators is powered from a supply voltage of 1.5V.6 pins are present on this board.This is a device from the Automotive, AEC-Q100, 74LVC series.The board has 6 pins.Electronic parts are designed with a number of bits of 1.Voltages up to 5.5V can be supplied.There is a minimum supply voltage of 1.2V for it.1.2V~5.5V is the supply rail configuration on the VCCA.1.2V~5.5V is the configuration of the VCCB supply rail.The way of mounting this electronic part is Surface Mount.1 channels are available.Logic ICs it uses are of the BUS TRANSCEIVER type.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.LVC/LCX/Z is the family name of this electronic device.Level translators consumes 16μA of quiescent current wLevel translatorshout being affected by outside factors.
74LVC1T45GW-Q100H Features
6-TSSOP, SC-88, SOT-363 package
6 pin count
Automotive, AEC-Q100, 74LVC series
6 pins
74LVC1T45GW-Q100H Applications
There are a lot of Nexperia USA Inc. 74LVC1T45GW-Q100H voltage translators & level shifters applications.
- One Assembly and Test Site
- Handset
- Controlled Baseline
- Wearable Health and Fitness Devices
- One Fabrication Site
- Debouncing a Mechanical Switch
- Personal computers
- Advanced Driver Assistance System (ADAS)
- Eliminate Slow or Noisy Input Signals
- One Assembly