74LVC1G53GN,115
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 23Ohm |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.3mm |
| Base Part Number | 74LVC1G53 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 250mW |
| Propagation Delay | 2.5 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVC1G53GN,115 Overview
Shipping overseas is convenient with the electronic component packed in 8-XFDFN. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 8 terminations. High-quality output is provided by the electronic component's 2 channels. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 8 pins. These analog multiplexers are built based on SPDT switching circuits. A 1 circuit is present in this switch device. Try searching with 74LVC1G53 to find analog multiplexer variants. An switch multiplexer with 23Ohm internal resistance has a value of 23Ohm. For functions related to 8 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply.
74LVC1G53GN,115 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
74LVC1G53GN,115 Applications
There are a lot of Nexperia USA Inc. 74LVC1G53GN,115 Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- PDAs
- Battery Powered Instruments
- Fault Tolerant Systems
- Sample-and-hold systems
- Optical Applications
- Audio signal routing
- Signal routing between systems
- Data switching
- Industrial