74LVC1G3157GM-Q10X
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC1G3157 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 40μA |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 4ns, 3.5ns |
| Charge Injection | 7.5pC |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 195Ohm |
| Signal Current-Max | 0.05A |
| RoHS Status | ROHS3 Compliant |
74LVC1G3157GM-Q10X Overview
The electronic component is convenient to ship overseas because it is packed in a 6-XFDFN. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 6 terminations. High-quality output is provided by the electronic component's 2 channels. A key feature of the 6 series is the inclusion of this electronic part as part of its design. SPDT switching circuits are used in these analog switch ics. It consists of 1 circuits. Try searching with 74LVC1G3157 to find analog multiplexer variants. As far as internal resistance is concerned, it has 15Ohm. To find out what the 6 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. The digital multiplexer has a low cost Single supply. It would be sufficient to run this analogue multiplexer with 40μA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. There is 195Ohm resistance between the Drain and Source on this part.
74LVC1G3157GM-Q10X Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz
Drain-to-Source resistance: 195Ohm
74LVC1G3157GM-Q10X Applications
There are a lot of Nexperia USA Inc. 74LVC1G3157GM-Q10X Analog Switches & Multiplexers ICs applications.
- Data switching
- Medical systems
- Microprocessor Controlled Analog Systems
- E1 Network Equipment
- DVD-R
- Precision data acquisition
- Microwave transmission systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Audio and video switching
- Low-Voltage