74LVC1G18GW-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Demultiplexer |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G18 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Propagation Delay | 5.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| RoHS Status | ROHS3 Compliant |
74LVC1G18GW-Q100H Overview
Digital switch is provided in the 6-TSSOP, SC-88, SOT-363 for the purpose of saving board space.The package is in the form of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Demultiplexer.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.A supply voltage of 1.65V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74LVC series can be used in a wide range of applications.This configuration includes 6 terminations as part of its basic functionality.You can also find related parts by using its logic switch base part number of 74LVC1G18.The multiplexer's system works with 3.3V voltage.This turn signal switch has 6 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.Surface Mount is the way it is mounted.The LVC/LCX/Z family includes the logic switch.Keeping Vsup at 5.5V will prevent some unnecessary failures.The multiplexer is equipped with 1 inputs.As a signal source, there are 2 output lines.
74LVC1G18GW-Q100H Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
2 output lines
74LVC1G18GW-Q100H Applications
There are a lot of Nexperia USA Inc. 74LVC1G18GW-Q100H Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- LVDS
- Data communication
- Night vision cameras
- Data bus control
- Electronics industry
- HD surveillance system
- Transmission from the computer system of a satellite
- CPU memory location identification
- Automatic health monitoring systems