74LVC16374APAG
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.1 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 4.5pF |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Inverting, Non-Inverting |
74LVC16374APAG Overview
The package is in the form of TSSOP. In total, there are 2 elements. 48terminations have occurred. Power is supplied from a voltage of 3.3V volts. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. This board is designed with 48pins on it. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 16bits are used in this part. Its flexibility is enhanced by 1 circuits. A total of 2ports are embedded in the D flip flop. High efficiency requires the supply voltage to be maintained at 3.3V. There is a consumption of 10μAof quiescent current from it. It is set to -24mAfor the high level output current. Low level output current is set to 24mA. A temperature below 85°Cis recommended for operation. Operating temperatures should be above -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 2.7VV. A maximum voltage of 3.6V can be provided by it. This frequency can be achieved at 150MHz. There is a logic IC BUS DRIVER used in the D flip flop. There are 2 functions available on this T flip flop. It has 48 pins.
74LVC16374APAG Features
48 pins
16 Bits
2 Functions
48 pin count
74LVC16374APAG Applications
There are a lot of Integrated Device Technology (IDT) 74LVC16374APAG Flip Flops applications.
- Differential Individual
- Data storage
- Automotive
- Latch
- Memory
- Dynamic threshold performance
- ESCC
- Bus hold
- Balanced Propagation Delays
- Bounce elimination switch