74LV4051DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 135Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 145 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 145 ns |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 34ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV4051DB,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.209, 5.30mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 8:1. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. There are 1 circuits in this multiplexer. 74LV4051 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 135Ohm. The datasheets for the 16 pins explain the functions. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 1V. This multiplexer would work with 80μA current. Draining from a single voltage supply, this analog switch requires a voltage of 1V~6V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. 3.3V operating voltages can be used with this electrical part. A 200MHz-bandwidth can be used for data transfer.
74LV4051DB,112 Features
8 Channels
80μA Supply Current
Bandwidth: 200MHz
74LV4051DB,112 Applications
There are a lot of Nexperia USA Inc. 74LV4051DB,112 Analog Switches & Multiplexers ICs applications.
- Modems
- E1 Network Equipment
- Relay Replacement
- Routers
- Battery Powered Instruments
- High-Voltage
- DSUs
- Avionics test equipment
- CSU
- Frame Relay Equipment