74LV377DB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV377 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Clock Frequency | 70MHz |
| Family | LV/LV-A/LVX/H |
| Current - Quiescent (Iq) | 160μA |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 36 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 36 ns |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74LV377DB,118 Overview
The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. You can find it in the Tape & Reel (TR)package. This output is configured with Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A 1V~3.6Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74LV series. You should not exceed 70MHzin its output frequency. D latch consists of 1 elements. During its operation, it consumes 160μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LV377 family contains this object. The power source is powered by 3.3V. There is 3.5pF input capacitance for this T flip flop. A device of this type belongs to the family of LV/LV-A/LVX/H. The RS flip flops belongs to FF/Latches base part number. Vsup reaches 5.5V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 1V. The D latch operates on 3.3V volts. In addition, WITH HOLD MODEis a characteristic of it.
74LV377DB,118 Features
Tape & Reel (TR) package
74LV series
3.3V power supplies
74LV377DB,118 Applications
There are a lot of NXP USA Inc. 74LV377DB,118 Flip Flops applications.
- Bus hold
- Data transfer
- Automotive
- Data storage
- Cold spare funcion
- Circuit Design
- Latch-up performance
- Balanced 24 mA output drivers
- Bounce elimination switch
- ATE