74LV273D,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Clock Frequency | 100MHz |
| Family | LV/LV-A/LVX/H |
| Current - Quiescent (Iq) | 160μA |
| Current - Output High, Low | 12mA 12mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 19ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 24 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 24 ns |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74LV273D,112 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 1V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. It belongs to the 74LVseries of FPGAs. This D flip flop should not have a frequency greater than 100MHz. A total of 1elements are present in it. During its operation, it consumes 160μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74LV273 family. An input voltage of 3.3Vpowers the D latch. There is 3.5pF input capacitance for this T flip flop. It is a member of the LV/LV-A/LVX/Hfamily of D flip flop. There is a FF/Latchesbase part number assigned to the RS flip flops. Vsup reaches 5.5V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be above 1V. A power supply of 3.3Vis required to operate it.
74LV273D,112 Features
Tube package
74LV series
3.3V power supplies
74LV273D,112 Applications
There are a lot of NXP USA Inc. 74LV273D,112 Flip Flops applications.
- Safety Clamp
- Guaranteed simultaneous switching noise level
- Circuit Design
- Supports Live Insertion
- Balanced Propagation Delays
- Computers
- Latch
- Buffer registers
- Count Modes
- Balanced 24 mA output drivers