74LCX821MSA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Propagation Delay (tpd) | 8.4 ns |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74LCX821MSA Overview
The package is in the form of 24-SSOP (0.209, 5.30mm Width). Package Tubeembeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. It is operating at a temperature of -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74LCX series. You should not exceed 150MHzin the output frequency of the device. A total of 1elements are present in it. As a result, it consumes 10μA quiescent current. There are 24 terminations,Power is provided by a 2.5V supply. Its input capacitance is 7pF farads. This D flip flop belongs to the family of LVC/LCX/Z. There is a 3.6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. This flip flop has a total of 2ports.
74LCX821MSA Features
Tube package
74LCX series
74LCX821MSA Applications
There are a lot of Rochester Electronics, LLC 74LCX821MSA Flip Flops applications.
- Latch
- Modulo – n – counter
- Storage Registers
- Load Control
- Counters
- Control circuits
- Dynamic threshold performance
- ESD protection
- Matched Rise and Fall
- Convert a momentary switch to a toggle switch