74LCX74MTC

74LCX74MTC

2V~3.6V 150MHz D-Type Flip Flop 74LCX74 14 Pins 74LCX Series 14-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Origchip NO: 598-74LCX74MTC
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 475
  • Description: 2V~3.6V 150MHz D-Type Flip Flop 74LCX74 14 Pins 74LCX Series 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 9 Weeks
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Weight 55.3mg
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2016
Series 74LCX
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type D-Type
Voltage - Supply 2V~3.6V
Base Part Number 74LCX74
Function Set(Preset) and Reset
Number of Outputs 4
Output Type Differential
Polarity Non-Inverting
Number of Circuits 2
Output Current 24mA
Clock Frequency 150MHz
Propagation Delay 8 ns
Quiescent Current 10μA
Turn On Delay Time 7 ns
Logic Function AND, D-Type, Flip-Flop
Current - Output High, Low 24mA 24mA
Number of Bits per Element 1
Max Propagation Delay @ V, Max CL 7ns @ 3.3V, 50pF
Trigger Type Positive Edge
Input Capacitance 7pF
Clock Edge Trigger Type Positive Edge
Height 900μm
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74LCX74MTC Overview


The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74LCXseries FPGA. It should not exceed 150MHzin terms of its output frequency. D latch belongs to the 74LCX74 family. A 7pFfarad input capacitance is provided by this T flip flop. This electronic part is mounted in the way of Surface Mount. There are 14pins on it. A Positive Edgeclock edge trigger is used in this device. The superior flexibility of this circuit is achieved by using 2 circuits. Its output current of 24mAallows for maximum design flexibility. There is 10μA quiescent current consumption by it.

74LCX74MTC Features


Tube package
74LCX series
14 pins

74LCX74MTC Applications


There are a lot of ON Semiconductor 74LCX74MTC Flip Flops applications.

  • Set-reset capability
  • ESCC
  • ESD performance
  • Power down protection
  • Control circuits
  • Differential Individual
  • Counters
  • High Performance Logic for test systems
  • Event Detectors
  • Data storage

Write a review

Note: HTML is not translated!
    Bad           Good