74LCX16821MTD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 740mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LCX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~3.6V |
| Base Part Number | 74LCX16821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 6.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX16821MTD Overview
It is embeded in 56-TFSOP (0.240, 6.10mm Width) case. D flip flop is embedded in the Tube package. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74LCXseries of FPGAs. There should be no greater frequency than 150MHzon its output. T flip flop consumes 20μA quiescent energy. JK flip flop belongs to 74LCX16821 family. A 7pFfarad input capacitance is provided by this T flip flop. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 56. This device's clock edge trigger type is Positive Edge. 20bits are used in its design. The JK flip flop is with 3 output lines to operate. This input has 2lines in it.
74LCX16821MTD Features
Tube package
74LCX series
56 pins
20 Bits
74LCX16821MTD Applications
There are a lot of ON Semiconductor 74LCX16821MTD Flip Flops applications.
- Bounce elimination switch
- Reduced system switching noise
- QML qualified product
- Consumer
- Communications
- Set-reset capability
- Latch-up performance
- Balanced 24 mA output drivers
- Cold spare funcion
- Differential Individual